Arduino Pro Micro board Bestseller available in Bangladesh. Arduino Pro Micro board completes all of the Arduino devices which are very popular with 4 channels of 10- bit ADC, 5 PWM legs, 12 Dios as well as fixed connections of Rx and Tx. It Runs at 16 MHz and 5V. This board also gives a reminder of other favorite Arduino-compatible boards. This is also very little that can go just about anywhere.
Arduino Pro Micro board:
Arduino Pro Micro is very smaller in size. It doesn’t include both the ISP header and the reset button. The Micro Pro was planned by Spark-fun from the Micro design.
| MICRO CONTROLLER | ATmega32U4 |
| OPERATING VOLTAGE | 5V |
| INPUT VOLTAGE | 7-12V |
| DIGITAL I/O PINS | 20 |
| PWM CHANNELS | 7 |
| ANALOG INPUT CHANNELS | 12 |
| DC CURRENT (PER I/O PIN) | 20 mA |
| DC CURRENT (3.3V PIN) | 50 mA |
| FLASH MEMORY | 32 KB |
| SRAM | 2.5 KB |
| EEPROM | 1 KB |
| CLOCK SPEED | 16 MHz |
- ATMEGA32U4 goes in 5V/16MHz
- Arduino IDE V1.0.1 supports it
- Micro USB connector uses on the board programming
- Four 10-bit ADC pin are available
- 5 PWM capability and 12 digital I/O
- Hardware serial connections are Rx and Tx
- Product Size: 34 mm x 18 mm



Reviews
There are no reviews yet.